Ramsey Winch - Powermaster Bumper Assembly w/ 20K Winch (Primed Finish, Manual Shift)
+ Tap or click image to enlarge
Hydraulic Planetary Bumper Winch
$14,600.45
$17,177.00
SKU 123829
Product Details
| This Winch's Configuration | |
|---|---|
| Finish | Primed |
| Drum Width in | 11 |
| Shift | Manual |
- Designed specifically for the Utility Industry
- Strong-light weight bumper design (engineered for strength without excess weight)
- Reinforced side walls and doors
- Lockable tool storage or Capstan head storage compartment
- Excellent corrosion protection using Galvaneal steel
- Stainless steel hardware
- Flush mounted, snag resistant doors
- Gas piston struts provide safety against accidental access door closure
- 20,000 lbs. 1st layer line pull
- Large drum flanges, holds 220 ft. cable
- Optional air shift
- Optional Extended shaft with pillar block mounting bracket
- Meets SAE J706
- Made in the USA
Specifications
| Rated Line Pull | 20,000 Lbs / 9,072 Kg |
| Note | Rated line pull is based on the first layer of cable. |
| 1st Layer Line Speed | 40 Ft/Min / 12.2 M/Min |
| Gear Ratio | 21:1 |
| Brake | Yes |
| Cable | None |
| Drum Size (L x F x B) | 11.00 x 13.25 x 6.75 In / 279.4 x 336.6 x 171.5 MM |
| Cable Capacity | 220 Ft / 67.1M |
| Recommend Cable Size | 9/16 In / 14.3 MM |
| Hydraulic Pressure Required | 2,350 PSI (162 Bar) |
| Hydraulic Flow Required | 30.0 GPM (114 LPM) |
| Motor Size | 14.9 Cu. In. (244 cc) |
| Additional Motor Options | None |
| Clutch Type | Sliding Spline |
| Clutch Control | Air, Manual |
| Fairlead | Roller |